Accessing GUI Of Brocade SAN Switch Without Browser

Accessing GUI Of Brocade SAN Switch Without Browser

Please refer to the steps below to easily accessing the GUI of Brocade SAN Switch without using Broswer

  1. Console to the Brocade SAN Switch with default username = admin & Password = password to configure the IP Address
        Warning: Default password not changed for 'root'. Please login as 'root' to change it.
        Please change passwords for switch default accounts now.
        Use Control-C to exit or press 'Enter' key to proceed.
    
        for user - admin
        Changing password for admin
        Enter old password:
        Password was not changed. Will prompt again at next login
        until password is changed.
        SW2:admin> ipaddrset
        DHCP [Off]:
        Ethernet IP Address [10.253.25.233]:10.253.25.233
        Ethernet Subnetmask [255.255.254.0]:255.255.254.0
        Gateway IP Address [10.253.24.254]:10.253.24.254
        SW2:admin>
  2. Install the latest JAVA version
  3. Add the IP Address of the SAN Switch to Exception Site List in JAVA
  4. Open Command Prompt and enter the following
    javaws "http://10.253.25.233/switchExplorer_installed.html"

    Replace the IP Address with the Actual IP of the SAN Switch

  5. You can access the GUI Console without using any Broswer now
  6. Brocade FC switch – Unable to launch the application

    Brocade FC switch – Unable to launch the application

    I have two Brocade 4424 Switches with FABRIC OS v6.2.2b, i need configure zones for my new server, but When i tried to open “web tools” i get an error “Unable to launch the application“.

    notebook with Windows 10 i have latest java 8 u181

    • different browsers (IE, Chrome, Firefox) but nothing.
    • I tried modify the “java.security” file and comment line “jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048” – but nothing
    • I tried add ip address of my fc sw to the site list in Java Configuration – but nothing

    The solution is simple…

    download old java like jre-6u45-windows-x64 , install it and run command from cmd. In my case:

    C:\Program Files\Java\jre6\bin>javaws.exe "http://10.1.0.105/switchExplorer_installed.html"

https://tomaskalabis.com/wordpress/brocade-fc-switch-unable-to-launch-the-application/

https://vmarena.com/how-to-create-zones-from-cli-on-a-brocade-san-switch/

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

This site uses Akismet to reduce spam. Learn how your comment data is processed.